New build freezes on motherboard logo screen overlay on Windows load even after replacing / testing every single component. Tech Support |
- New build freezes on motherboard logo screen overlay on Windows load even after replacing / testing every single component.
- Help my Desktop Monitor has a different color dots?
- Need advice on how to deal with my grandmothers friend says she needs to use my computer to reset hers after being hacked.
- Getting dats from old phone.
- Activate Windows after factory reset on new built PC
- Looking for original wallpapers for my pc.
- Speaker "farting" on low tones in ASUS laptop after working for some time
- Moved my gaming PC to new apartment. Won't even boot.
- I need help, bad. (Internet related)
- I was hacked in another country over public WiFi, keep getting captchas and not sure if it’s taken care of?
- No headphone sound when connected through optical cable
- Airflow issues in Corsair Crystal 570X causing NVMe drive's temperature to average at 73* C.
- Bought a 2nd hand GPU, doesn't power on.
- I can’t install my network drivers
- Random restarts when playing games
- How do I disable windows 10 updates?
- New HDD making squeaking sounds
- (help) new install of win 7 but no audio.
- Programs From Hard Drive of Precious Computer Not Working Properly
- Error : REFERENCE_BY_POINTER
- Windows 10 Update unsupported disk layout for UEFI firmware?
- Old PC cannot Boot - Biostar 945GC-M7
- Wanting to confirm the issue before buying a new GPU
- Will my psu power the following specs?
| Posted: 24 Aug 2019 02:27 PM PDT I consider myself fairly competent with computer parts and computer stuff in general and have built 7 computers prior to this one but the issue I'm having now is completely beyond my comprehension & I'm certainly not a computer hardware expert by any means. Some backstory -- On Monday I moved cubicles & whoever built the cubicles out in our office did not properly ground the one I moved to. When I plugged my 7 month old PC into the powerbar connected to the cubicle power outlet, it shorted and fried virtually everything. We did not have any other PC parts compatible with my build to test to see what was and wasn't fried from my PC so I ordered essentially an entire new computer with the plan on returning what still worked from my original PC. Since then I have had this issue where on boot, the system freezes on the motherboard's logo, and the wheel thing just stops spinning (sometimes with it saying "preparing windows repair", sometimes with it just being the spinning circle, sometimes "preparing disk check" etc.). I have had this same issue with two motherboards now, two CPUs & two PCUs. I have ran memcheck on the new RAM I bought and after four passes it gives no errors, both with each individually and them together (interestingly, memtest86 boots without issue, as does BIOS). I have tried different monitors & different wall outlets as well. I have tried to boot windows from two different drives, one was the SSD from my dead computer (which boots windows on my laptop without issue) and one was an empty disk drive where I installed the windows UEFI repair software from here. I have tried both of these drives via SATA and via USB. The only thing I can even remotely think of it being now (I'm really out of ideas for what to continue troubleshooting at this point), is that I did test my old RAM on both of the new motherboards I have tried (when i got the second new mobo I wasn't sure if it was the old mobo that was DOA) but it still seems unlikely that damaged RAM would permanently damage the motherboard into the issue I'm having (just an assumption however). My old RAM is definitely fucked though as the motherboard just turns on and then off quickly after a few seconds when I try to use it. The parts I have tried so far:
I am using a new Coolmaster 212, arctic fox thermal paste, I seated it by screwing three times in a clockwise fashion for even CPU pressure distribution etc. I have tried plugging the display into my 1070, 2080ti & my motherboards display port and it's still the same issue. One more thing I've never seen before that happens between both motherboards (this might be normal though) is when I flip the switch on the PSU to turn it off, the next time I try to boot it, the motherboard will run for ~20 seconds with a red light next to CPU warning, shut off and then will boot normally until it freezes at the motherboard logo overlay screen. Any help is greatly appreciated, this has been the most frustrating week I can remember in quite some time... All I want to do is to get back to making machine learning models for work :( Here's a video of the problem I'm having: https://streamable.com/88a7z Please let me know if there are absolutely any other details I can provide to help troubleshooting things further. EDIT: Bios update did the trick and it now appears to be working as intended. Thanks for the help everyone! Looking at the update notes I think this was the requirement: https://i.imgur.com/VcJEQsy.png. Since the same thing happened with two separate motherboards for me, I would imagine a lot of people will end up having this problem too so hopefully this helps some other people in the future. [link] [comments]  |
| Help my Desktop Monitor has a different color dots? Posted: 25 Aug 2019 12:02 AM PDT It's hard to explain but When I move my cursor there's a small rectangular or square shape with different colors on my screen, even when I watch something on youtube or when I play League of Legends Game, they keep appearing. They Don't appear on the same place but they just keep going everywhere. Then I tried to switch my Monitor to my TV it keep appearing also I don't know whats causing this. Need Help [link] [comments]  |
| Posted: 24 Aug 2019 11:50 PM PDT I am 18 years old and have just started going to college, I live with my grandmother and have a Mac that I use to do homework, and take a coding class, Anyhow my grandmother told me to bring the computer downstairs because her friend needs to use it. From what I could gather her friend says that she has been hacked and that her and her son will be coming over to my grandmothers house to use my computer to "reset" theirs. They said that they couldn't give her anymore details over the phone because "the hackers were monitoring their calls". When I told my grandmother that it sounded fishy and asked her for more details, she reminded me that she was allowing me to live there, so I have no choice but to let them use my computer. I normally am out at the time of day that they are coming and do not want them going through my computer and potentially either downloading some more malware or trying to get into my accounts since I do not know them. This whole thing sounds incredibly fishy, so I need to know is there any possibility that this is legitimate and that by using my computer they can somehow reset theirs and leave virus free, or is it more likely that they will (perhaps unknowingly) install malware on my computer as well. I am skeptical since I recently downloaded a virus myself and got rid of it with a factory reset without the use of another computer. Its also possible that they will be bringing physical hardware that they can connect directly into my computer. What can I do to protect my computer while they are here? I am thinking of maybe creating a guest user so that they can use the computer without administrative privileges, or having access to my files. will this be sufficient to protect my computer? And if you guys know the solution to the problem that they are having what can I do to help them fix their computer without letting them break mine? [link] [comments]  |
| Posted: 25 Aug 2019 01:18 AM PDT So I have an old HTC one m7 with a halfway working screen and it freezes every few minutes then restarts. Is there any way to retrieve the data from it? [link] [comments]  |
| Activate Windows after factory reset on new built PC Posted: 25 Aug 2019 03:20 AM PDT So I just built new PC and had issues booting. It kept saying that boot diveces cannot be found. I fixed it by setting boot to legacy settings and afterwards it let me boot normally. After that I did factory reset since I used only drives from my old PC. Now I used the Microsoft account that has Windows tied to it already, but it says that I need to activate Windows now. No idea what to do. I don't have the key anymore and that shouldn't even be problem since the key was already tied to the account for years edit: On microsoft websites it still sees like it's activated on my old PC. So I guess I need to contact support? [link] [comments]  |
| Looking for original wallpapers for my pc. Posted: 25 Aug 2019 02:11 AM PDT I have a Panasonic ToughBook CF-19 MK7 and I am trying to source the original wallpaper that it came with, but for the life of me i cant find them. by any chance does anyone ave them or know where i could potentially source them? thanks [link] [comments]  |
| Speaker "farting" on low tones in ASUS laptop after working for some time Posted: 25 Aug 2019 01:58 AM PDT Hi. I bought a ZenBook Pro laptop early this year, and have been decently happy with it. My only real problem is the speaker, however it has rather to do with sound drivers. It is a UX550 laptop. Basically, after using it for some time (sometimes a few minutes, sometimes a few hours) it starts to fart when playing low sounds at some point. Then it requires either a PC restart, or restarting the drivers (through for example changing 24-bit to 16-bit sound in the driver settings). Initially I thought this had something to do with ASUS's OS image, so I installed a fresh one from MS, but that didn't fix the issue at all. Have also disable HW accel for sound. I have tried removing the current drivers and installing slightly different ones from realtek- and those work fine. Until I restart my PC- then old drivers are installed automatically and the custom ones overwritten. Any ideas? [link] [comments]  |
| Moved my gaming PC to new apartment. Won't even boot. Posted: 24 Aug 2019 11:30 PM PDT So I recently moved into a new apartment for school. I brought over my gaming PC from home - it's a custom built PC. Before the move, the PC worked perfectly fine. Also, I unplugged everything and discharged any leftover power before handling it. I didn't use it at all the following day until I moved it into my new apartment. Sidenote: when I packed my PC into my car I had it sitting vertically, not horizontally. I understand that having is sit up vertically like that and being packed in my car could've caused something small to bend, shift, or break. When I got to my new apartment, I plugged everything in and pressed the power button. It didn't boot. So I waited for a bit, and then pressed it again. It didn't boot again. So I opened it up and checked most, if not all, the connection that could be causing the problem. I plugged everything back in and it still didn't boot. In more detail, this is what happens:
I looked online on what I should do and only found one or two forum posts with people having similar problems. So I followed what they did:
I really do not know what to do. All of these ended up not working. I don't know what it could be. I highly doubt my computer was damaged during the move. My brother has the exact same build as me and he's moved it way more than I have and he rarely has any problems with his. Aside from checking to see if the PSU, MOBO, CMOS, or CPU are faulty, I really don't know what else it could possibly be. It just seems like a big coincidence that one of these would fail during the move. My car was air conditioned and the PC was not in the sun so nothing could've overheated. One theory I have (which is a total crapshoot) is that the outlet in my apartment just doesn't work with my computer. Maybe it can't get enough power? I really don't know. I worked perfectly fine at my parent's house. I've tried everything I can without taking the whole thing apart (which I really don't have time to do). Any advice would help. I am posting this before going to bed, so any suggestions would be greatly appreciated. Thank you for reading. [link] [comments]  |
| I need help, bad. (Internet related) Posted: 24 Aug 2019 05:34 PM PDT Okay, so the basics of my problem is my internet only shuts off when I'm using it on my desktop. I'm 15 turning 16 and gaming is basically my life. I'm on here about 8-10+ hours a day and that's all I enjoy doing really. In the last few days (week and a half, almost 2) I've had my internet just randomly drop. My mom doesn't think it's that big of an issue which really frustrates me since she has 0 issue using her computer all day, but as soon as I get on, in about 5 min, it kicks off, and stays off until I reset it. It's gotten to the point where I don't care anymore because it's a hike to get to my router from my room. Another weird issue is the internet signal drops for everything yet the modem lights all stay on like it should connect to the internet, yet it doesn't. I've had techs at my house the last week checking for stray voltage replacing wires to the ped, etc. I'm not extremely tech savvy but If anyone can help I'd literally cry this issue is driving me to the brink of insanity. EDIT: I think my PC might be crashing my network, that or my service provider needs to get their shit together because I've had them out here all last week and about to be this week. [link] [comments]  |
| Posted: 25 Aug 2019 04:14 AM PDT I'll start by saying I know nothing about phones or how any of this works. My phone was hacked over public WiFi when I realized days later that there was a pending wire transfer being made in my bank account (I deleted the account). I set up two factor authentication on my iCloud after doing a factory reset and got a notification that someone was trying to sign in to my Apple ID in another province of the country I was in. This was all pretty scary but I thought I took care of it (factory reset, password change, downloaded Mcaffe security with a vpn). Now I keep getting the message of detecting unusual traffic when I do a google search under my IP address. Could I still be hacked? I read that a vpn could be causing this and turned mine off and it stopped but I just want to make sure, as I'm still a little freaked out by the whole thing. My phone also thinks I am in a different country but not the one I was hacked in which I think is weird. Anyone have any info or help? Is there anything else I can do? [link] [comments]  |
| No headphone sound when connected through optical cable Posted: 25 Aug 2019 04:11 AM PDT Hello, so i have a weird problem. I have soundblaster xfi surround pro connected at the moment through optical cable to my speakers and everything works fine. Now when i tried to connect headphones i still hear sound through speakers but not through my headphones even tho the speaker configuration changes inside creative control panel to headphones. It all worked well when i was using RCA but the ports are dying in my sound card i think thats why i changed. Is there any option i should change or something? Im using windows 10. [link] [comments]  |
| Airflow issues in Corsair Crystal 570X causing NVMe drive's temperature to average at 73* C. Posted: 25 Aug 2019 04:04 AM PDT I Have Asus Maximus Code which supports 2 NVMe drives. One of them is inside the motherboard's "Armor" and has insane temperature (Going upto 94*C). Due to my radiator (Corsair H110 GTX) being so massive that I can only fit 2 fans in the front, which causes issues to the airflow. My drive doesn't have sufficient airflow and I can't add another fan. I was thinking of getting a NVMe PCIE adapter but wanted more opinions on how to tackle this problem. PS: according the HWInfo, my drive only has 88% life remaining, while the other has 100%. I bought this drive 8 months ago. [link] [comments]  |
| Bought a 2nd hand GPU, doesn't power on. Posted: 25 Aug 2019 03:58 AM PDT Hi all, So I just got back from buying a 2nd hand Sapphire Pulse RX 570 4G, I've plugged it in, and there's no power going to it. It's also not showing up in Device Manager. My specs: - i5-3750k - 16 GB DDR3 - Gigabyte Z77-D3H - Was using a GTX 460 - ThermalTake Toughpower XT 875W Previous owner said they hadn't used it for 6 months and hadn't tested it before selling it to me. Everything else in my rig is running fine. What can I try before calling this guy back for a refund? [link] [comments]  |
| I can’t install my network drivers Posted: 25 Aug 2019 03:53 AM PDT Recently my bios got corrupted and i had to reset my windows. Everything was going fine until my internet stopped working. I had this problem once more and i started installing the realtek enthernet driver but i can't anymore. It says " The Realtek Network Controller was not found. If Deep Sleep Mode in enabled. Please Plug the Cable" And when I put the lan cable in the pc the lighit doesn't go on. If you have any sugestions feel free to post them down bellow. [link] [comments]  |
| Random restarts when playing games Posted: 24 Aug 2019 06:01 PM PDT Lately I've been getting random, sudden restarts, straight from a game to a black screen, about every 15-20 minutes when playing. Started a couple weeks ago when playing Black Mesa, and has continued while playing Dishonored (both through Steam). I replaced my HDD with an SSD, thinking it was a disk failure, and I'm on a clean Windows 10 install, but the issue is persisting. I've checked that Windows and all drivers are up to date, to the best of my ability to find current drivers for each component. The Windows Event viewer indicates two Warning codes consistently, at the moment of every restart:
and...
These are usually preceded by an event, 7026:
It had also been previously showing this error...
But I removed two USB Bluetooth adapters (a Zexmte generic adapter for my headset, and a Microsoft Wireless Desktop 2000 adapter for keyboard and mouse). Removing those made the BTHUSB error go away, but I have no reason to think it won't come back if I start using them again. I've only experienced this issue when playing games. It doesn't appear to be tied to any specific in-game action, particle effects, or framerate. If I put Steam into offline mode and disable my Ethernet adapter, I can play seemingly fine, leading me to believe that the issue has something to do with my Ethernet adapter. Specs:
[link] [comments]  |
| How do I disable windows 10 updates? Posted: 25 Aug 2019 03:44 AM PDT How do I disable windows 10 updates because every new update brings new problems and bsod and crashes. Disabled the windows update service but it still updating. [link] [comments]  |
| New HDD making squeaking sounds Posted: 25 Aug 2019 03:41 AM PDT Hey everyone,upon turning on my new laptop for the first time i noticed a sporadic high-pitched squeaking noise.I opened it up and im pretty sure its the HDD. I recorded it, take a listen.While booting you can hear the "Squee-Squeek" noise 2 times (The laptop boots from a different drive, a SSD), and can only be heard sporadic while it is turned on. Is that normal behavior or should i change the HDD? HDD: 1TB Seagate ST1000LM049 BarraCudaLaptop: MSI GL63 8SE-071 [link] [comments]  |
| (help) new install of win 7 but no audio. Posted: 25 Aug 2019 03:40 AM PDT Hi there I was wondering if someone could help me with this audio problem I have please. -I have a brand new install of Windows 7 ultimate x64 -installed all drivers -checked through device manager if audio drivers are causing problems -right clicked on the volume icon and gone to sounds, under playback I have selected hdmi and can see the green bars moving, which indicates there is sound - made sure that tv has volume turned up. I'm stumped as what to do next and get this problem sorted. even my headphones plugged in to the front io panel does not work, same when i try to use an optical output any help is very much appreciated [link] [comments]  |
| Programs From Hard Drive of Precious Computer Not Working Properly Posted: 25 Aug 2019 03:35 AM PDT I recently upgraded my computer and doing so I decided to go ahead and install windows on an SSD because the windows on my HDD for some reason wouldn't boot up with this new computer. Long story short my programs from my HDD that I want to use aren't working correctly any suggestions? Also, should I delete the windows folder from my HDD? [link] [comments]  |
| Posted: 25 Aug 2019 03:24 AM PDT Bought a pre-owned pc online. It was working. I left it on through the night. When I woke it was shut down. And when I open it, i got a bluescreen error saying REFERENCE_BY_POINTER. Is it possible it overheated? Or is it just faulty? [link] [comments]  |
| Windows 10 Update unsupported disk layout for UEFI firmware? Posted: 25 Aug 2019 03:24 AM PDT Screenshot of error message and the situation in which it was recieved. I'm not 100% sure where to start with this. I tried to follow a guide to convert the drive from MBR to GPT, both by trying the built-in tool in Windows and by using DiskPart in an elevated dos shell. Both resulted in basically telling me that I had to reinstall windows 10 to change that. I'm not sure how this setting got changed, I've been updating my windows 10 fine for more than 2 years before this. I didn't notice any uptick in people seeing this error lately, so I know it's not something that changed on microsofts end. It has to be something I did on my end, or some software I have recently used. My prime suspect stems from the fact that I recently tried and failed to clone my main OS drive, failing at exactly the step you probably think I did. When I was supposed to shut down and remove the old hard drive, the computer instead restarted and got super confused when it tried to boot windows, it took me a few days to sort that out. So I'm guessing during that is probably when I must have changed something that led to this. I hope it's something easy, I think I heard something about just telling it not to boot in legacy mode or something like that, or maybe to boot in legacy mode, I can't remember for sure, but I haven't tried that. I can't remember where I saw that advice. Despite all this I think I'm actually somewhat competent at this stuff, I just don't get the opportunity for a lot of practice.... generally something I'm happy about. But I know trying to solve all these problems myself is probably wasting a ton of time. And while I always learn a ton of cool new stuff, I rarely end up benefiting from that knowledge again before I forget it anyway. So I should probably just be getting help more often. So, please somebody tell me I have overlooked something simple. My computer is hella worn-in and really comfortable, and I still planned on 2-3 more years of this computer before I had to start fresh again on whatever the next windows is by then. Oh, probably important to note that my main OS hard drive is an SSD, specifically a Samsung 850 pro 512GB, my windows 10 is 64-bit, assuming windows even comes in not 64-bit anymore. Not sure if my motherboard matters for this, but it is an Asus Z170 deluxe, with bios version 3801. I will unfortunately be unavailable for answers for the next 8 hours or so as I am typing this while I should already be sleeping. I hope I have given enough information in the mean time. Edit: It also could have been a Bios setting I had to change in order to get the new Hard drive to work. Since it is an M2, specifically a Samsung 970 EVO plus. That might be when I had to change whatever legacy setting that one guide I can't find anymore mentioned? Also, I do still have to clone to that drive at some point. Is there any chance I can make this configuration change to that drive and have those settings survive the cloning process? or would the clone include changing those settings back to how this drive has them set? Edit 2: Ok, I should probably actually go to sleep now. I don't have anything important to do, but it is now 5 am here, which has gotta be at least 2 hours past my bed time, lol. [link] [comments]  |
| Old PC cannot Boot - Biostar 945GC-M7 Posted: 25 Aug 2019 03:12 AM PDT Hello, I have found Pentium d 820 with biostar 945GC-M7 mobo. Tried hours but I couldn't manage to let it see the booting device. It sees harddisk but doesn't recognize it as a bootable device. I tried to boot with usb but it didn't work either. It just says "Disk boot failure, insert system disk and press enter". Boot order is correct. Cables are working. Both usb and harddisk working in my other pc. [link] [comments]  |
| Wanting to confirm the issue before buying a new GPU Posted: 25 Aug 2019 03:10 AM PDT Hey all, I've had my PC now for almost 4 years. Withing the last 2 years I've had a issues with crashes/hang ups and freezes but now I think I've had enough (probably too late but hopefully not. I'm 99% sure that at least my GPU needs replacing, bare minimum, but I was wondering if anyone could help find a solution. I cannot find a single root cause of the issue. I'll be playing games and then suddenly one of the following will happen: - The computer will freeze. The picture will remain frozen, I will hear a loud BZZZZZZZ sound and sometimes my mouse/keyboard will lose their lights. - The computer will freeze and go to a black screen (sometimes with sound playing). I will then no longer be able to get a signal until I restart it. -The game will freeze, cut to black and then back to the desktop. I will have the Battlenet launcher (Blizzard games launcher) go completely see through (link to picture is here https://imgur.com/a/LWH7W7m ) Just today I've checked my Windows Updater and everything is updated. I've also uninstalled/reinstalled my AMD drivers but I still run into issues. I've been that it might be GPU related, motherboard related or memory related. Is there anything that I can do to rule out any of these issues before I spend money on more parts? I'm not sure what exactly will help but I've listed my system information and my display information below. Thanks in advance ------------------ System Information ------------------ Time of this report: 8/25/2019, 20:06:22 Machine name: DESKTOP-GMP05FC Machine Id: {CBC73C56-7017-4AEC-A583-185A679F6A1E} Operating System: Windows 10 Home 64-bit (10.0, Build 18362) (18362.19h1_release.190318-1202) Language: English (Regional Setting: English) System Manufacturer: MSI System Model: MS-7978 BIOS: C.10 (type: UEFI) Processor: Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz (4 CPUs), ~3.5GHz Memory: 16384MB RAM Available OS Memory: 16324MB RAM Page File: 10700MB used, 8055MB available Windows Dir: C:\WINDOWS DirectX Version: DirectX 12 DX Setup Parameters: Not found User DPI Setting: 96 DPI (100 percent) System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled Miracast: Available, with HDCP Microsoft Graphics Hybrid: Not Supported DirectX Database Version: Unknown DxDiag Version: 10.00.18362.0267 64bit Unicode --------------- Display Devices --------------- Card name: AMD Radeon (TM) R9 390 Series Manufacturer: Advanced Micro Devices, Inc. Chip type: AMD Radeon Graphics Processor (0x67B1) DAC type: Internal DAC(400MHz) Device Type: Full Device (POST) Device Key: Enum\PCI\VEN_1002&DEV_67B1&SUBSYS_20151462&REV_80 Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER] Device Problem Code: No Problem Driver Problem Code: Unknown Display Memory: 16330 MB Dedicated Memory: 8168 MB Shared Memory: 8161 MB Current Mode: 1920 x 1080 (32 bit) (59Hz) HDR Support: Not Supported Display Topology: Internal Display Color Space: DXGI_COLOR_SPACE_RGB_FULL_G22_NONE_P709 Color Primaries: Red(0.642578,0.345703), Green(0.321289,0.625977), Blue(0.150391,0.051758), White Point(0.313477,0.329102) Display Luminance: Min Luminance = 0.500000, Max Luminance = 270.000000, MaxFullFrameLuminance = 270.000000 Monitor Name: BenQ GL2760 Monitor Model: BenQ GL2760 Monitor Id: BNQ78D5 Native Mode: 1920 x 1080(p) (60.000Hz) Output Type: HDMI Monitor Capabilities: HDR Not Supported Display Pixel Format: DISPLAYCONFIG_PIXELFORMAT_32BPP Advanced Color: Not Supported Driver Name: C:\WINDOWS\System32\DriverStore\FileRepository\u0345944.inf_amd64_403c37b116746a6f\B345674\aticfx64.dll,C:\WINDOWS\System32\DriverStore\FileRepository\u0345944.inf_amd64_403c37b116746a6f\B345674\aticfx64.dll,C:\WINDOWS\System32\DriverStore\FileRepository\u0345944.inf_amd64_403c37b116746a6f\B345674\aticfx64.dll,C:\WINDOWS\System32\DriverStore\FileRepository\u0345944.inf_amd64_403c37b116746a6f\B345674\amdxc64.dll Driver File Version: 26.20.13001.29010 (English) Driver Version: 26.20.13001.29010 DDI Version: 12 Feature Levels: 12_0,11_1,11_0,10_1,10_0,9_3,9_2,9_1 Driver Model: WDDM 2.6 Graphics Preemption: DMA Compute Preemption: DMA Miracast: Not Supported Detachable GPU: No Hybrid Graphics GPU: Not Supported Power P-states: Not Supported Virtualization: Paravirtualization Block List: No Blocks Catalog Attributes: Universal:False Declarative:True Driver Attributes: Final Retail Driver Date/Size: 8/08/2019 10:00:00 AM, 1979928 bytes WHQL Logo'd: Yes WHQL Date Stamp: Unknown Device Identifier: {D7B71EE2-24F1-11CF-8006-DC323BC2D735} Vendor ID: 0x1002 Device ID: 0x67B1 SubSys ID: 0x20151462 Revision ID: 0x0080 Driver Strong Name: oem26.inf:cb0ae4141cbcdede:ati2mtag_Hawaii:26.20.13001.29010:PCI\VEN_1002&DEV_67B1&REV_80 Rank Of Driver: 00CF2000 Video Accel: Unknown DXVA2 Modes: DXVA2_ModeMPEG2_VLD DXVA2_ModeMPEG2_IDCT DXVA2_ModeH264_VLD_NoFGT DXVA2_ModeH264_VLD_Stereo_Progressive_NoFGT DXVA2_ModeH264_VLD_Stereo_NoFGT DXVA2_ModeVC1_VLD DXVA2_ModeMPEG4pt2_VLD_AdvSimple_NoGMC DXVA2_ModeVC1_IDCT DXVA2_ModeWMV9_IDCT Deinterlace Caps: n/a D3D9 Overlay: Not Supported DXVA-HD: Not Supported DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled MPO MaxPlanes: 1 MPO Caps: Not Supported MPO Stretch: Not Supported MPO Media Hints: Not Supported MPO Formats: Not Supported PanelFitter Caps: Not Supported PanelFitter Stretch: Not Supported [link] [comments]  |
| Will my psu power the following specs? Posted: 25 Aug 2019 03:09 AM PDT Psu is EVGA 500W bronze rated Specs i want to run it with: B450 Mobo Ryzen 5 2600x (stock cooler) Hyperx Fury DDR4 2444 mhz Rtx 2070 1 - 120gb ssd and 1 - 640 gb hdd Case - Corsair carbide spec 04 (all included fans in it) Also, should i undervolt my gpu till i get a better psu to make sure my pc doesnt explode (if ppl say its too weak) [link] [comments]  |
| You are subscribed to email updates from TechSupport. To stop receiving these emails, you may unsubscribe now. | Email delivery powered by Google |
| Google, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States | |
No comments:
Post a Comment