CPU Fan not spinning Tech Support

CPU Fan not spinning
Cpu and Gpu compatibility?
virsh cpu-baseline issue
(NOOB) I cannot enable reagentc: I want it enabled so I have a windows recovery (WINDOWS 10)
Headphone splitter cable not working depending on what I have plugged in
Problem with Windows 11 taskbar

Posted: 27 Jan 2022 02:54 AM PST

My CPU fan is not spinning. Yesterday, everything is working properly then it just stop today. I tried to opening my pc again, it spins for a bit but it just turns off after that. Then when I tried to do it again, it just won't spin anymore.

I tried to switch it to a different fan headers, I haven't touch the BIOS, and even replace the whole CPU cooler and nothing happens. I enabled the "error fan" notification in the bios and it keeps showing.

Specs:
CPU: Ryzen 5 5600G
Ram: 2x8 GB
PSU: Corsair CV450
MOBO: MSI Mag B550M Mortar Wifi

submitted by /u/Lemehdo
[link] [comments]

Cpu and Gpu compatibility?

Posted: 26 Jan 2022 04:59 PM PST

My CPU is AMD Ryzen 5 2600X 3.6 GHz 6-Core and I wanted to upgrade my old GPU (RX 560) to either GTX 1650 4GB Dual Core or AMD RX 6500 XT and I don't know if they are compatible, I didn't build my PC by myself so I don't know much

submitted by /u/xLightn1ng_
[link] [comments]

virsh cpu-baseline issue

Posted: 26 Jan 2022 10:19 AM PST

According to the libvirt virtualization api manual pages:

cpu-baseline
Compute baseline CPU which will be supported by all host CPUs given in <file>.

So, as a theoretical exercise, I've created the following file:

### cpus1.xml <cpu> <arch>x86_64</arch> <model>coreduo</model> </cpu> <cpu> <arch>x86_64</arch> <model>athlon</model> </cpu> <cpu> <arch>x86_64</arch> <model>Opteron_G1</model> </cpu>

And then tried the following command:

root@debian:~# virsh cpu-baseline cpus1.xml <cpu mode='custom' match='exact'> <model fallback='allow'>pentiumpro</model> <feature policy='require' name='mtrr'/> </cpu>

So far so good. Among a coreduo, an athlon and an Opteron_G1 the baseline cpu is something close to a pentiumpro. Makes sense.

What if I change the order of cpus?

### cpus2.xml <cpu> <arch>x86_64</arch> <model>Opteron_G1</model> </cpu> <cpu> <arch>x86_64</arch> <model>coreduo</model> </cpu> <cpu> <arch>x86_64</arch> <model>athlon</model> </cpu>

The result should be the same, correct?

root@debian:~# virsh cpu-baseline cpus2.xml error: operation failed: CPU vendors do not match

Unfortunately, the result is not the same.

QUESTION
Why the order of the cpus can change the baseline cpu?

submitted by /u/Jeron_Baffom
[link] [comments]

(NOOB) I cannot enable reagentc: I want it enabled so I have a windows recovery (WINDOWS 10)

Posted: 26 Jan 2022 05:21 PM PST

Please bare with me because I don't know a lot about this kind of stuff. I have been trying to fix this for over 4 hours and nothing works.

Windows 10 64-bit operating system, x64-based processor

I cannot enable reagentc with the command reagentc /enablecommand prompt is run as administrator.

I installed windows on my new ssd and manually added a partition to boot off of. However, there is no partition for recovery, so if something goes wrong I cannot recover anything.

I also got this error at first:

REAGENTC.EXE: Unable to update Boot Configuration Data.

I've put in so many commands and tried so many different things, I dont think its possible to fix.

After trying many things I now get this error:

REAGENTC.EXE: Operation failed: 3bc3 REAGENTC.EXE: An error has occurred.

Posts I've already looked at:

reagentc /enable failing with error code 3bc3, Windows Update failing with error 800F0922

ReAgentc: Unable to update WinRE boot configuration data

I replaced my WinRE file in system 32 with a newly downloaded one from an ISO file of windows, still no luck.

I'll give some information that may be useful:

reagentc /info :

Windows RE status: Disabled

Windows RE location:

Boot Configuration Data (BCD) identifier: 00000000-0000-0000-0000-000000000000

Recovery image location:

Recovery image index: 0

Custom image location:

Custom image index: 0

REAGENTC.EXE: Operation Successful.

BCDedit /Enum all and BCDedit /V /Enum all :

The boot configuration data store could not be opened. The requested system device cannot be found.

Any help is greatly appreciated.

submitted by /u/it_is_what_it_is746
[link] [comments]

Headphone splitter cable not working depending on what I have plugged in

Posted: 26 Jan 2022 12:57 PM PST

I currently own a gaming laptop (Legion 5 15ARH05H) that has one headset port that I use. When I have plugged headsets there in the past, they have worked flawlessly.

I recently bought a one male to two female splitter cable that would allow me to use both my microphone and my headphones at the same time. However, it does not work as expected. When I plug the splitter in with just the microphone attached, it works perfectly. When I plug the splitter in with just my headphones attached, they also work just fine.

However, if I attempt to plug them both into the splitter at the same time, one of two things happen:

If I plug both the mic and the headphones into the splitter, and then plug the whole contraption into my computer, the microphone does not work, and does not show up under the recording devices.
If I plug in the splitter first, and then plug in the headphones and mic (order didn't matter), the microphone is recognized, but it does not hear anything. The headphones also become slightly quieter, omit certain frequencies, and have a constant static noise in the background.

It seems impossible to me that the splitter cable is the issue, but I can't think of anything else that would be causing this? I've googled for the past 3ish hours and can't find anything that matches my problem.

submitted by /u/Omegegi
[link] [comments]

Problem with Windows 11 taskbar

Posted: 26 Jan 2022 12:32 PM PST